Jump to content
Slate Blackcurrant Watermelon Strawberry Orange Banana Apple Emerald Chocolate Marble
Slate Blackcurrant Watermelon Strawberry Orange Banana Apple Emerald Chocolate Marble
Sign in to follow this  
glaukos

LinuxStories: RHEL 7 / CentOS 7: How to get started with Firewalld

Recommended Posts

Today I was trying to learn and know about Systemd. I have found one of the great Article about firewalld, Sharing with you guys, It will help you to understand this biggest and major change in RHEL and CentOS 7.
This article is not mine, I found on internet and felt that this is wonderful Article so Sharing with you all, Thanks to Original author, Given credit to him at the end of article.

firewalld

Presentation

Firewalld is the new userland interface in RHEL 7. It replaces the iptables interface and connects to the netfilter kernel code. It mainly improves the security rules management by allowing configuration changes without stopping the current connections.
To know if Firewalld is running, type:

# systemctl status firewalld
firewalld.service - firewalld - dynamic firewall daemon
Loaded: loaded (/usr/lib/systemd/system/firewalld.service; enabled)
Active: active (running) since Tue 2014-06-17 11:14:49 CEST; 5 days ago
...
or alternatively:

# firewall-cmd --state
running

Note: If Firewalld is not running, the command displays not running.
If you’ve got several network interfaces in IPv4, you will have to activate ip_forwarding. To do that, paste the following line in the /etc/sysctl.conf file:

net.ipv4.ip_forward=1

Then, activate the configuration:
 
# sysctl -p

Although Firewalld is the RHEL 7 way to deal with firewalls and provides many improvements, iptables can still be used.

Zone management

Also, a new concept of zone appears : all network interfaces can be located in the same default zone or divided into different ones according to the levels of trust defined.
To get the default zone, type:

# firewall-cmd --get-default-zone 
public

To get the list of zones where you’ve got network interfaces assigned to, type:
 
# firewall-cmd --get-active-zones
public
interfaces: eth0

To get the list of all the available zones, type:
 
# firewall-cmd --get-zones
block dmz drop external home internal public trusted work

To get all the details about the public zone, type:
 
# firewall-cmd --zone=public --list-all
public (default, active)
interfaces: eth0
sources:
services: dhcpv6-client ssh
ports:
masquerade: no
forward-ports:
icmp-blocks:
rich rules:

To change the default zone to home permanently, type:
 
# firewall-cmd --set-default-zone=home
success

Network interfaces can be assigned to a zone in a temporary (until the next reboot or reload) or permanent way.
To assign the eth0 network interface temporary to the internal zone, type:
 
# firewall-cmd --zone=internal --change-interface=eth0
success

To assign the eth0 network interface permanently to the internal zone (a file called internal.xml is created in the /etc/firewalld/zones directory), type:
 
# firewall-cmd --permanent --zone=internal --change-interface=eth0
success

To know which zone is associated with the eth0 interface, type:
 
# firewall-cmd --get-zone-of-interface=eth0
internal

Service management

After assigning each network interface to a zone, it is now possible to add services to each zone.
To allow the http service permanently in the internal zone, type:

# firewall-cmd --permanent --zone=internal --add-service=http
success
# firewall-cmd --reload

Note1: Type –remove-service=http to deny the http service.
Note2: The firewall-cmd –reload command is necessary to activate the change. Contrary to the –complete-reload option, current connections are not stopped.
To get the list of services in the default zone, type:
 
# firewall-cmd --list-services
dhcpv6-client ssh

Note: To get the list of the services in a particular zone, add the –zone= option.

Service firewall configuration

With the Firewalld package, the firewall configuration of the main services (ftp, httpd, etc) comes in the /usr/lib/firewalld/services directory. But it is still possible to add new ones in the /etc/firewalld/services directory. Also, if files exist at both locations for the same service, the file in the /etc/firewalld/services directory takes precedence.
For example, it is the case of the HAProxy service. There is no firewall configuration associated.
Create the /etc/firewalld/services/haproxy.xml and paste the following lines:
 


HAProxy
HAProxy load-balancer


Assign the correct SELinux context and file permissions to the haproxy.xml file:
 
# cd /etc/firewalld/services
# restorecon haproxy.xml
# chmod 640 haproxy.xml

Add the HAProxy service to the default zone permanently and reload the firewall configuration:
 
# firewall-cmd --permanent --add-service=haproxy
# firewall-cmd --reload

Port management

Port management follows the same model as service management.
To allow the 443/tcp port temporary in the internal zone, type:

# firewall-cmd --zone=internal --add-port=443/tcp
success
# firewall-cmd --reload

Note: type –remove-port=443/tcp to deny the port.
To get the list of ports open in the internal zone, type:
 
# firewall-cmd --zone=internal --list-ports
443/tcp

Masquerading

If your firewall is your network gateway and you don’t want everybody to know your internal addresses, you can set up two zones, one called internal, the other external, and configure masquerading on the external zone. This way, all packets will get your firewall ip address as source address.
To set up masquerading on the external zone, type:

# firewall-cmd --zone=external --add-masquerade

Note1: To remove masquerading, use the –remove-masquerade option.
Note2: To know if masquerading is active in a zone, use the –query-masquerade option.

Port forwarding

In addition to the masquerading, you can want to use port forwarding.
If you want all packets intended for port 22 to be now forwarded to port 3753, type:

# firewall-cmd --zone=external --add-forward-port=port=22:proto=tcp:toport=3753

Note1: To remove port forwarding, use the –remove-forward-port option.
Note2: To know if port forwarding is active in a zone, use the –query-forward-port option.
Also, if you want to define the destination ip address, type:
 
# firewall-cmd --zone=external --add-forward-port=port=22:proto=tcp:toport=3753:toaddr=10.0.0.1

Direct rules

It is still possible to set specific rules by using the direct mode (here to open the tcp port 9000) that by-passes the Firewalld interface:

# firewall-cmd --direct --add-rule ipv4 filter INPUT 0 -p tcp --dport 9000 -j ACCEPT
success
# firewall-cmd --reload

Note: This last example has been borrowed from Khosro Taraghi’s blog.
To display all the direct rules added, type:
 
# firewall-cmd --direct --get-all-rules


Thanks to Original Author for explaining it very nicely.

View the full article

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×